DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
467
Chapter 46
Network
Management
Commands
enable snmp
disable snmp
create trusted_host
[<ipaddr> | <ipv6addr> | network <network_address> | ipv6_prefix
<ipv6networkaddr> ] {snmp | telnet | ssh | http | https | ping}
config trusted_host
[<ipaddr> | <ipv6addr> | network <network_address> | ipv6_prefix
<ipv6networkaddr>] [add | delete] [{snmp | telnet | ssh | http | https | ping} | all]
delete trusted_host
[ipaddr <ipaddr> | ipv6address <ipv6addr> | network <network_address>|
ipv6_prefix <ipv6networkaddr> | all]
show trusted_host
config snmp system_name
<sw_name>
config snmp system_location
<sw_location>
config snmp system_contact
<sw_contact>
enable snmp traps
disable snmp traps
enable snmp authenticate_traps
disable snmp authenticate_traps
enable snmp linkchange_traps
disable snmp linkchange_traps
show snmp traps
{linkchange_traps {ports <portlist>}}
config snmp linkchange_traps ports
[all | <portlist>] [enable | disable]
config snmp coldstart_traps
[enable | disable]
config snmp warmstart_traps
[enable | disable]
config rmon trap {rising_alarm [enable | disable] | falling_alarm [enable | disable]}
show rmon
46-1
enable snmp
Description
This command is used to enable the SNMP function. When SNMP function is disabled, the
network manager will not be able to access SNMP MIB objects. The device will not send traps or
notification to network manager either.
Format
enable snmp
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.