DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
240
Example
To configure the DDM RX/TX power unit to mw:
DGS-3710-12C:admin# config ddm power_unit mw
Command: config ddm power_unit mw
Success.
DGS-3710-12C:admin#
21-4
show ddm
Description
This command is used to display the DDM global settings.
Format
show ddm
Parameters
None.
Restrictions
None.
Example
To display the DDM global settings:
DGS-3710-12C:admin# show ddm
Command: show ddm
DDM Log : Enabled
DDM Trap : Enabled
DDM Tx/Rx Power Unit : mw
Success.
DGS-3710-12C:admin#
21-5
show ddm ports
Description
This command is used to show the current operating DDM parameters and configuration values of
the optic module of the specified ports. There are two types of thresholds: the administrative
configuration and the operation configuration threshold.