DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
625
Example
To display the receipient for which the traps are targeted:
DGS-3710-12C:admin#show snmp host
Command: show snmp host
SNMP Status : Enabled
SNMP Host Table
Host IP Address SNMP Version Community Name / SNMPv3 User Name
--------------- --------------- ---------------------------------
172.26.248.11 V2c rinpoche
Total Entries: 1
DGS-3710-12C:admin#
62-18
show snmp v6host
Description
This command is used to display the recipient for which the traps are targeted.
Format
show snmp v6host {<ipv6addr>}
Parameters
<ipv6addr>
- (Optional) Specifies the v6host IP address.
Note:
If no parameter is specified, all SNMP IPv6 hosts will be displayed.
Restrictions
None.
Example
To display the recipient for which the traps are targeted: