DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
714
Event description: Logout through Web (SSL)
Log Message: Logout through Web (SSL) (Username: <username>,
IP: <ipaddr>, )
Parameters description:
username: User Name
ipaddr: IP address.
Informational
Event description: Web (SSL) session timed out
Log Message: Web(SSL) session timed out (Username:
<username>, IP: <ipaddr>, )
Parameters description:
username: User Name
ipaddr: IP address.
Informational
Telnet
Event description: Successful login through Telnet
Log Message: Successful login through Telnet (Username:
<username>, IP: <ipaddr>, )
Parameters description:
username: User Name
ipaddr: IP address.
Informational
Event description: Login failed through Telnet
Log Message: Login failed through Telnet (Username: <username>,
IP: <ipaddr>)
Parameters description:
username: User Name
ipaddr: IP address.
Warning
Event description: Logout through Telnet
Log Message: Logout through Telnet (Username: <username>, IP:
<ipaddr>)
Parameters description:
username: User Name
ipaddr: IP address.
Informational
Event description: Telnet session timed out
Log Message: Telnet session timed out (Username: <username>, IP:
<ipaddr>, )
Parameters description:
username: User Name
ipaddr: IP address.
Informational
DDM
Event description: DDM exceeded or recover from DDM alarm
threshold
Log Message: DDM Port <portNum> SFP [thresholdType]
[exceedType] the [thresholdSubType] alarm threshold
Parameters description:
portNum: The port number.
thresholdType: the DDM threshold type. The value should be one of
the following values: temperature, supply voltage, bias current, TX
power, RX power.
exceedType: indicate exceed threshold or recover to normal event,
the value should be “recovered from” or “exceeded”
thesholdSubType: the DDM threshold sub type, the value should be
“high” or “low”.
Critical
Event description: DDM exceeded or recover from DDM warning
threshold
Log Message:DDM Port <portNum> SFP [thresholdType]
[exceedType] the [thresholdSubType] warning threshold
Parameters description:
portNum: The port number.
thresholdType: the DDM threshold type. The value should be one of
the following values: temperature, supply voltage, bias current, TX
power, RX power.
exceedType: indicate exceed threshold or recover to normal event,
the value should be “recovered from” or “exceeded”
thesholdSubType: the DDM threshold sub type, the value should be
“high” or “low”.
Warning
TFTP Client
Event description: Firmware upgraded successfully.
Log Message: Firmware upgrade by console successfully
(Username: <username>, IP: <ipaddr>, MAC: <macaddr>)
Parameters description:
Informational