DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
416
41-2
enable mirror
Description
This command is used to enter a port mirroring configuration into the switch, and then turn the port
mirroring on or off without having to modify the port mirroring configuration.
Note:
If the target port hasn’t been set, enable mirror will not be allowed.
Format
enable mirror
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable mirroring configurations:
DGS-3710-12C:admin#enable mirror
Command: enable mirror
Success.
DGS-3710-12C:admin#
41-3
disable mirror
Description
This command, combined with the
enable mirror
command above, allows you to enter a port
mirroring configuration into the switch, and then turn the port mirroring on or off without having to
modify the port mirroring configuration.
Format
disable mirror
Parameters
None.