DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
658
DGS-3710-12C:admin#upload cfg_toTFTP 10.48.74.121 dest_file c:\cfg\dgs3710\cfg
Command: upload cfg_toTFTP 10.48.74.121 dest_file c:\cfg\dgs3710\cfg
Connecting to server.................. Done.
Upload configuration.................. Done.
DGS-3710-12C:admin#
To upload all logs to a TFTP server:
DGS-3710-12C:admin#upload log_toTFTP 10.48.74.121 dest_file c:\log\dgs3710\log
Command: upload log_toTFTP 10.48.74.121 dest_file c:\log\dgs3710\log
Connecting to server.................. Done.
Upload log............................ Done.
DGS-3710-12C:admin#
To upload a dangerous log:
DGS-3710-12C:admin# upload attack_log_toTFTP 10.48.74.121 dest_file
c:\alert.txt
Command: upload attack_log_toTFTP 10.48.74.121 dest_file c:\alert.txt
Success.
DGS-3710-12C:admin#
71-3
config configuration
Description
This command is used to select a configuration file as the next boot up configuration or to apply a
specific configuration to the system.
Format
config configuration <config_id 1-2> [boot_up | delete | active]
Parameters
<config_id 1-2>
- Enter the configuration file ID on the device file system to use.
boot_up
- Specifies that the specified configuration file will be used as the boot up configuration.
delete
- Specifies that the specified configuration file will be deleted.
active
- Specifies that the specified configuration file will set as active.
Restrictions
Only Administrator-level users can issue this command.