DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
58
<udp_port_number 1-65535>
- The accounting statistics value must be between 1 and
65535.
default
- Specifies to use the default value.
timeout
- Specifies the time in seconds for waiting for a server reply. The default value is 5
seconds.
<int 1-255>
- Specifies the time in seconds for waiting for a server reply. The timeout value
must be between 1 and 255. The default value is 5 seconds.
default
- Specifies to use the default value.
retransmit
- Specifies the count for re-transmission. The default value is 2.
<int 1-20>
- The re-transmit value must be between 1 and 20.
default
- Specifies to use the default value.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure a RADIUS server:
DGS-3710-12C:admin#config radius add 1 10.48.74.121 key dlink default
Command: config radius add 1 10.48.74.121 key dlink default
Success.
DGS-3710-12C:admin#
4-24
show radius
Description
This command is used to display RADIUS server configurations.
Format
show radius
Parameters
None.
Restrictions
None.
Example
To display RADIUS server configurations: