DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
477
46-15
disable snmp linkchange_traps
Description
This command is used to disable SNMP linkchange trap support.
Format
disable snmp linkchange_traps
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable SNMP linkchange trap support:
DGS-3710-12C:admin#disable snmp linkchange_traps
Command: disable snmp linkchange_traps
Success.
DGS-3710-12C:admin#
46-16
config snmp linkchange_traps ports
Description
This command is used to configure the sending of linkchange traps and per port control for
sending of change traps.
Format
config snmp linkchange_traps ports [all | <portlist>] [enable | disable]
Parameters
all
- Specifies all ports.
<portlist>
- Specifies a port or range of ports.
enable
- Enable sending of the link change trap for this port.
disable
- Disable sending of the link change trap for this port.
Restrictions
Only Administrator-level users can issue this command.