DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
353
Parameters
ports
- Specifies a range of ports to configure the maximum multicast group.
<portlist>
- Specifies a range of ports to be configured.
vlanid
- Specifies the VLAN ID to configure the maximum multicast group.
<vlanid_list>
- Enter the VLAN ID of the VLAN here.
ipv4
- (Optional) Specifies that the maximum number of IPv4 learned addresses should be
limited.
ipv6
- (Optional) Specifies that the maximum number of IPv6 learned addresses should be
limited.
max_group
- (Optional) Specifies the maximum number of the multicast groups.
<value 1-1024>
- The range is from 1 to 1024 or infinite.
infinite
- Infinite is the default setting.
action
- (Optional) Specifies the action for handling newly learned groups when the register is
full.
drop
- The new group will be dropped.
replace
- The new group will replace the oldest group in the register table.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure the maximum number of multicast groups that ports 1 and 3 can join to 100:
DGS-3710-12C:admin# config max_mcast_group ports 1, 3 max_group 100
Command: config max_mcast_group ports 1, 3 max_group 100
Success.
DGS-3710-12C:admin#
34-9
show max_mcast_group
Description
This command is used to display the maximum number of multicast groups that a port or VLAN
can join. If the IPv4 or IPv6 option is not specified, IPv4 is implied.
Format
show max_mcast_group [ports <portlist> | vlanid <vlanid_list>] {[ipv4 | ipv6]}
Parameters
ports
- Specifies a range of ports to display the maximum number of multicast groups.
<portlist>
- Specifies a range of ports to be displayed.
vlanid
- Specifies the VLAN ID for displaying the maximum number of multicast groups.
<vlanid_list>
- Enter the VLAN ID of the VLAN here.
ipv4
- (Optional) Specifies to display the maximum number of IPv4 learned addresses.
ipv6
- (Optional) Specifies to display the maximum number of IPv6 learned addresses.