DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
90
offset_chunk_1
- (Optional) Specifies that the contents of the offset trunk 1 will be monitored.
<value 0-31>
- Enter the offset 1 value used here. This value must be between 0 and 31.
<hex 0x0-0xffffffff>
- Enter the offset trunk 1 mask used here.
offset_chunk_2
- (Optional) Specifies that the contents of the offset trunk 2 will be monitored.
<value 0-31>
- Enter the offset 2 value used here. This value must be between 0 and 31.
<hex 0x0-0xffffffff>
- Enter the offset trunk 2 mask used here.
offset_chunk_3
- (Optional) Specifies that the contents of the offset trunk 3 will be monitored.
<value 0-31>
- Enter the offset 3 value used here. This value must be between 0 and 31.
<hex 0x0-0xffffffff>
- Enter the offset trunk 3 mask used here.
offset_chunk_4
- (Optional) Specifies that the contents of the offset trunk 4 will be monitored.
<value 0-31>
- Enter the offset 4 value used here. This value must be between 0 and 31.
<hex 0x0-0xffffffff>
- Enter the offset trunk 4 mask used here.
ipv6
- Specifies the IPv6 filtering mask.
class
- Specifies the IPv6 class mask.
flowlabel
- Specifies the IPv6 flow label mask.
tcp
- Specifies that the rule applies to TCP traffic.
src_port_mask
- (Optional) Specifies the TCP source port mask.
<hex 0x0-0xffff>
- Specifies the TCP source port mask.
dst_port_mask
- (Optional) Specifies the TCP destination port mask.
<hex 0x0-0xffff>
- Specifies the TCP destination port mask.
udp
- Specifies that the rule applies to UDP traffic.
src_port_mask
- (Optional) Specifies the UDP source port mask.
<hex 0x0-0xffff>
- Specifies the UDP source port mask.
dst_port_mask
- (Optional) Specifies the UDP destination port mask.
<hex 0x0-0xffff>
- Specifies the UDP destination port mask.
source_ipv6_mask
- Specifies the IPv6 source IP mask.
<ipv6mask>
- (Optional) Specifies the IPv6 source IP mask.
destination_ipv6_mask
- Specifies the IPv6 destination IP mask.
<ipv6mask>
- (Optional) Specifies the IPv6 destination IP mask.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To create access list profiles:
DGS-3710-12C:admin#create access_profile profile_id 1 profile_name 1 ethernet
vlan source_mac FF-FF-FF-FF-FF-FF destination_mac 00-00-00-FF-FF-FF 802.1p
ethernet_type
Command: create access_profile profile_id 1 profile_name 1 ethernet vlan
source_mac FF-FF-FF-FF-FF-FF destination_mac 00-00-00-FF-FF-FF 802.1p
ethernet_type
Success.
DGS-3710-12C:admin#
DGS-3710-12C:admin#create access_profile profile_id 2 profile_name 2 ip vlan
source_ip_mask 255.255.255.255 destination_ip_mask 255.255.255.0 dscp icmp
Command: create access_profile profile_id 2 profile_name 2 ip vlan
source_ip_mask 255.255.255.255 destination_ip_mask 255.255.255.0 dscp icmp
Success.
DGS-3710-12C:admin#