DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
682
Note:
If no VLAN is specified, all VLAN counters will be displayed.
Restrictions
None.
Example
To display the VLAN counter rules for VLAN IDs 1 and 2:
Command: show vlan_counter vlanid 1-2
VLAN ID Ports Packet Type Counter Type
------- ------------- ----------- --------------
1 Broadcast Packet Count
1 Broadcast Byte Count
1 Multicast Packet Count
1 Unicast Byte Count
1 All Frame Packet Count
1 2,5-7 Broadcast Byte Count
1 1-12 Multicast Packet Count
1 1-6 Unicast Byte Count
1 1,3,5 All Frame Packet Count
2 All Frame Packet Count
2 1-3 Broadcast Packet Count
2 2-4 Multicast Packet Count
2 2,3-6 Unicast Byte Count
2 3,7 All Frame Byte COunt
DGS-3710-12C:admin#
72-20
show vlan_counter statistics
Description
This command is used to display the VLAN level receives packet or receive byte statistics.
Format
show vlan_counter statistics {[vlan <vlan_name> | vlanid <vidlist>] {ports <portlist>}}
Parameters
vlan
- (Optional) Specifies the VLAN name.
<vlan_name>
- Specifies the VLAN name.
vlanid
- (Optional) Specifies a list of VLANs by VLAN ID.
<vidlist>
- Specifies a list of VLANs by VLAN ID.
ports
- (Optional) Specifies to clear statistics counters by a specific port on a specific VLAN.
<portlist>
- Specifies a port list.