DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
263
Format
config multicast vlan_filtering_mode [vlanid <vidlist> | vlan <vlan_name 32> | all]
[forward_all_groups | forward_unregistered_groups | filter_unregistered_groups]
Parameters
vlanid
- Specifies the VLAN ID list to set.
<vidlist>
- Specifies the VLAN ID list to set.
vlan
- Specifies the VLAN to set.
<vlan_name 32>
- The maximum length is 32 characters.
all
- Specifies to set all VLANs.
forward_all_groups
- Specifies that the filtering mode will be set to forward all groups.
forward_unregistered_groups
- Specifies the filtering mode as forward_unregistered_groups.
filter_unregistered_groups
- Specifies the filtering mode as filter_unregistered_groups. This is
the default option.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure the the multicast packet filtering mode for all VLANs:
DGS-3710-12C:admin#config multicast vlan_filtering_mode all
forward_unregistered_groups
Command: config multicast port filtering_mode all forward_unregistered_groups
Success.
DGS-3710-12C:admin#
25-6
delete fdb
Description
This command is used to delete a permanent FDB entry.
Format
delete fdb <vlan_name 32> <macaddr>
Parameters
<vlan_name 32>
- Specifies the name of the VLAN on which the MAC address resides. The
maximum length is 32 characters.
<macaddr>
- Specifies the MAC address to be deleted from the static forwarding table.
Restrictions
None.