DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
351
profile_name
- (Optional) Specifies a profile name to be added to or deleted from the port or
VLAN.
<name 1-32>
- The profile name can be up to 32 characters long.
access
- (Optional) Specifies whether the access is permit or deny.
permit
- Specifies that the packets that match the addresses defined in the profiles will be
permitted. The default mode is permit.
deny
- Specifies that the packets that match the addresses defined in the profiles will be
denied.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To add multicast address profile 2 to ports 1 and 3:
DGS-3710-12C:admin#config limited_multicast_addr ports 1,3 add profile_id 2
Command: config limited_multicast_addr ports 1,3 add profile_id 2
Success.
DGS-3710-12C:admin#
34-7
show limited_multicast_addr
Description
This command is used to display a multicast address range by ports or by VLANs. When the
function is configured on a port or VLAN, it limits the multicast group operated by the IGMP
snooping function and layer 3 function. If the IPv4 or IPv6 option is not specified, IPv4 is implied.
Format
show limited_multicast_addr [ ports <portlist> | vlanid <vlanid_list>] {[ipv4 | ipv6]}
Parameters
ports
- Specifies a range of ports to show the limited multicast address configuration.
<portlist>
- Specifies a range of ports to be displayed.
vlanid
- Specifies the VLAN ID of VLANs that require information displaying about the multicast
address filtering function.
<vlanid_list>
- Enter the VLAN ID of the VLAN here.
ipv4
- (Optional) Specifies to display the IPv4 multicast profile associated with the port or VLAN.
ipv6
- (Optional) Specifies to display the IPv6 multicast profile associated with the port or VLAN.
Restrictions
None.
Example
To display the limited multicast address range on VLAN 1: