DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
55
Restrictions
Only Administrator and Operator-level users can issue this command. If the specific port state is
changed from the enabled state to the disabled state, this port will move to its original VLAN.
Example
To configure a guest VLAN setting for ports 1 to 8:
DGS-3710-12C:admin#config 802.1x guest_vlan ports 1-8 state enable
Command: config 802.1x guest_vlan ports 1-8 state enable
Warning, The ports are moved to Guest VLAN.
Success.
DGS-3710-12C:admin#
4-20
show 802.1x guest_vlan
Description
This command is used to display guest VLAN information.
Format
show 802.1x guest_vlan
Parameters
None.
Restrictions
None.
Example
To display guest VLAN information:
DGS-3710-12C:admin#show 802.1x guest_vlan
Command: show 802.1x guest_vlan
Guest Vlan Setting
-----------------------------------------------------------
Guest VLAN : guest
Enabled Guest VLAN Ports : 1-10
DGS-3710-12C:admin#