![background image](/i/d-link/144853/d-link-dgs-3710-12c/h/d-link-dgs-3710-12c-193.png)
DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
189
DGS-3710-12C:admin# debug dhcpv6_client packet sending state enable
Command: debug dhcpv6_client packet sending state enable
Success.
DGS-3710-12C:admin#
16-19
debug dhcpv6_relay state enable
Description
This command is used to enable the DHCPv6 relay Debug function.
Format
debug dhcpv6_relay state enable
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To enabled DHCPv6 relay debug function:
DGS-3710-12C:admin# debug dhcpv6_relay state enable
Command: debug dhcpv6_relay state enable
Success.
DGS-3710-12C:admin#
16-20
debug dhcpv6_relay state disable
Description
This command is used to disable the DHCPv6 relay Debug function.
Format
debug dhcpv6_relay state disable
Parameters
None.