DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
152
ma_index
– Specifies the MA index value used.
<uint 1-4294967295>
- Enter the MA index value used here. This value must be
between 1 and 4294967295.
mepid
- (Optional) Specifies the MEPID.
<int 1-8191>
- Specifies the MEP MEPID between 1 and 8191.
mepname
- (Optional) Specifies the MEP name.
<string 32>
- Specifies the MEP name. The maximum length is 32 characters.
Restrictions
None.
Example
To delete the CFM link trace reply:
DGS-3710-12C:admin#delete cfm linktrace mepname mep1
Command: delete cfm linktrace mepname mep1
Success.
DGS-3710-12C:admin#
12-24
config cfm mp_ltr_all
Description
This command is to enable or disable the "all MPs reply LTRs" function. This function is for test
purposes. According to IEEE 802.1ag, a Bridge replies with one LTR to an LTM. This command
can make all MPs on the LTM’s forwarding path reply with LTRs, no matter whether they are on a
Bridge or not.
Format
config cfm mp_ltr_all [enable | disable]
Parameters
enable
- Enable this feature.
disable
- Disable this feature.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable the all-MPs-reply-to-LTR function: