![background image](/i/d-link/144853/d-link-dgs-3710-12c/h/d-link-dgs-3710-12c-266.png)
DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
262
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To add multicast MAC forwarding:
DGS-3710-12C:admin# config multicast_fdb default 01-00-5E-00-00-00 add 1-5
Command: config multicast_fdb default 01-00-5E-00-00-00 add 1-5
Success.
DGS-3710-12C:admin#
25-4
config fdb aging_time
Description
This command is used to set the age-out timer for the switch’s dynamic unicast MAC address
forwarding tables.
Format
config fdb aging_time <sec 10-1000000>
Parameters
<sec 10-1000000>
- Specifies the time in seconds that a dynamically learned MAC address will
remain in the switch’s MAC address forwarding table without being accessed, before being
dropped from the database. The range of the value is 10 to 1000000. The default value is 300.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure MAC address aging time:
DGS-3710-12C:admin#config fdb aging_time 300
Command: config fdb aging_time 300
Success.
DGS-3710-12C:admin#
25-5
config multicast vlan_filtering_mode
Description
This command is used to configure the multicast packet filtering mode for VLANs.