DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
540
Format
config scheduling_mechanism {ports [<portlist> | all]} [strict | wrr]
Parameters
ports
- (Optional) Specifies the range of ports to be configured.
<portlist>
- Enter the list of ports here.
all
- Specifies that all the ports will be used.
strict
- Specifies that the ports will operate in strict mode.
wrr
- Specifies that the ports will operate based on their weight settings.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure the traffic scheduling mechanism for each port in strict mode:
DGS-3710-12C:admin# config scheduling_mechanism strict
Command: config scheduling_mechanism strict
Success.
DGS-3710-12C:admin#
To configure the traffic scheduling mechanism in strict mode on port 1:
DGS-3710-12C:admin# config scheduling_mechanism ports 1 strict
Command: config scheduling_mechanism ports 1 strict
Success.
DGS-3710-12C:admin#
53-7
show scheduling
Description
This command is used to display the current traffic scheduling parameters.
Format
show scheduling {<portlist>}
Parameters
<portlist>
- (Optional) Specifies the range of ports to be displayed.
Restrictions
None.