DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
83
Example
To display all authentication server hosts:
DGS-3710-12C:admin#show authen server_host
Command: show authen server_host
IP Address Protocol Port Timeout Retransmit Key
--------------- -------- ----- ------- ---------- ------------------------
-
10.1.1.222 TACACS+ 15555 10 --------- This is a secret
Total Entries : 1
DGS-3710-12C:admin#
5-22
config authen parameter response_timeout
Description
This command is used to configure the amount of time waiting for user to input on Console, Telnet,
SSH, and HTTP applications.
Format
config authen parameter response_timeout <int 0-255>
Parameters
<int 0-255>
- Specifies the amount of time for user input on the Console, Telnet, SSH, or HTTP
interface. 0 means there is no time out. The default value is 30 seconds.
Restrictions
Only Administrator-level users can issue this command.
Example
To configure 60 seconds for user to input:
DGS-3710-12C:admin#config authen parameter response_timeout 60
Command: config authen parameter response_timeout 60
Success.
DGS-3710-12C:admin#
5-23
config authen parameter attempt
Description
This command is used to configure the maximum attempts for users trying to login or promote the
privilege on Console, Telnet, SSH or HTTP applications. If the failure value is exceeded,
connection or access will be locked.