DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
690
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To set the priority of the voice VLAN to be six:
DGS-3710-12C:admin#config voice_vlan priority 6
Command: config voice_vlan priority 6
Success.
DGS-3710-12C:admin#
73-4
config voice_vlan oui
Description
This command is used to configure the user-defined voice traffic’s OUI. The OUI is used to identify
the voice traffic. There are a number of pre-defined OUIs. The user can further define the user-
defined OUIs if needed. The user-defined OUI cannot be the same as the pre-defined OUI. The
following are the pre-defined voice traffic’s OUI:
OUI
Vendor
Mnemonic Name
00:E0:BB
3COM
3com
00:03:6B
Cisco
cisco
00:E0:75
Veritel
veritel
00:D0:1E
Pingtel
pingtel
00:01:E3
Siemens
siemens
00:60:B9
NEC/ Philips
nec&philips
00:0F:E2
Huawei-3COM
huawei&3com
00:09:6E
Avaya
avaya
Format
config voice_vlan oui [add <macaddr> <macmask> {description <desc 32>} | delete
<macaddr> <macmask>]
Parameters
add
- Specifies to add a user-defined OUI of Voice device vendor.
<macaddr>
- Enter the user-defined OUI MAC address to add here.
<macmask>
- Enter the user-defined OUI MAC address mask to add here.
description
- (Optional) Specifies a description for the user-defined OUI.
<desc 32>
- Specifies a description for the user-defined OUI. The maximum length is 32
characters.
delete
- Specifies to delete a user-defined OUI of Voice device vendor.
<macaddr>
- Enter the user-defined OUI MAC address to delete here.