DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
585
high threshold.
disable
- Probabilistic drop red colored packets if the queue depth is above the low threshold,
and probabilistic drop yellow colored packets if the queue depth is above the high
threshold.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure sRED:
DGS-3710-12C:admin#config sred all all threshold low 64 high 80 drop_rate low 8
high 8 drop_green disable
Command: config sred all all threshold low 64 high 80 drop_rate low 8 high 8
drop_green disable
Success.
DGS-3710-12C:admin#
58-4
show sred
Description
This command is used to display the current thresholds (per port and per queue) parameters in
use on the Switch
Format
show sred {<portlist> {<class_id 0-7>}}
Parameters
<portlist>
- (Optional) Specifies the list of port used for the display.
<class_id 0-7>
- (Optional) Specifies which of the hardware CoS queues to display.
If no parameter is specified, then all information will be displayed.
Restrictions
None.
Example
To display sRED information: