DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
549
Command: disable hol_prevention
Success.
DGS-3710-12C:admin#
53-17
show hol_prevention
Description
This command is used to display the head of line prevention state on the switch.
Format
show hol_prevention
Parameters
None.
Restrictions
None.
Example
To display HOL prevention state on the switch:
DGS-3710-12C:admin#show hol_prevention
Command: show hol_prevention
Device HOL Prevention State: Enabled
DGS-3710-12C:admin#
53-18
config dscp trust
Description
This command is used to configure the state of DSCP trust per port. When the DSCP is not trusted,
802.1p is trusted.
Format
config dscp trust [<portlist> | all] state [enable | disable]
Parameters
<portlist>
- Specifies a range of ports to configure.
all
- Specifies to configure all ports on the switch.
state
- Specifiesto enable or disable DSCP trust. By default, DSCP trust is disabled.
enable
- Specifies to enable DSCP trust.