DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
352
DGS-3710-12C:admin#show limited_multicast_addr vlanid 1
Command: show limited_multicast_addr vlanid 1
VLAN : 1
Access : Deny
Profile ID Name Multicast Addresses
----------- ----------- -----------------------------
1 customer 224.19.62.34 – 224.19.162.200
DGS-3710-12C:admin#
To display the limited multicast address range on ports 1 and 3:
DGS-3710-12C:admin#show limited_multicast_addr ports 1,3
Command: show limited_multicast_addr ports 1,3
Port : 1
Access : Deny
Profile ID Name Multicast Addresses
----------- ----------- -----------------------------
1 customer 224.19.62.34 – 224.19.162.200
Port : 3
Access : Deny
Profile ID Name Multicast Addresses
----------- ---------------- -----------------------------
1 customer 224.19.62.34 – 224.19.162.200
DGS-3710-12C:admin#
34-8
config max_mcast_group
Description
This command is used to configure the maximum number of multicast groups a port or VLAN can
join. If the IPv4 or IPv6 option is not specified, IPv4 is implied. When the joined groups for a port or
a VLAN have reached the maximum number, the newly learned group will be dropped if the action
is specified as drop. The newly learned group will replace the oldest group if the action is specified
as replace.
Format
config max_mcast_group [ports <portlist> | vlanid <vlanid_list>] {[ipv4 | ipv6]} {max_group
[<value 1-1024> | infinite] | action [drop | replace]} (1)