DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
697
Chapter 74
Web-based Access
Control (WAC)
Commands
enable wac
disable wac
config wac authorization attributes
{radius [enable | disable] | local [enable | disable]}(1)
config wac ports
[<portlist> | all] {state [enable | disable] | aging_time [infinite | <min 1-1440>] |
idle_time [infinite | <min 1-1440>] | block_time [<sec 0-300>]}(1)
config wac method
[local | radius]
config wac default_redirpath
<string 128>
config wac clear_default_redirpath
config wac virtual_ip
<ipaddr>
config wac switch_http_port
<tcp_port_number 1-65535> {[http | https]}
create wac user
<username 15> {[vlan <vlan_name 32> | vlanid <vlanid 1-4094>]}
delete wac
[user <username 15> | all_users]
config wac user
<username 15> [vlan <vlan_name 32> | vlanid <vlanid 1-4094> | clear_vlan]
show wac
show wac ports
{<portlist>}
show wac user
show wac auth_state ports
{<portlist>}
clear wac auth_state
[ports [<portlist> | all] {authenticated | authenticating | blocked} | macaddr
<macaddr>]
74-1
enable wac
Description
This command is used to enable the WAC function.
Format
enable wac
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable the WAC function: