DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
261
25-2
create multicast_fdb
Description
This command is used to make an entry into the switch’s multicast MAC address forwarding
database.
Format
create multicast_fdb <vlan_name 32> <macaddr>
Parameters
<vlan_name 32>
- Specifies the name of the VLAN on which the MAC address resides. The
maximum length is 32 characters.
<macaddr>
- Specifies the multicast MAC address to be added to the static forwarding table.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To create multicast MAC forwarding:
DGS-3710-12C:admin# create multicast_fdb default 01-00-5E-00-00-00
Command: create multicast_fdb default 01-00-5E-00-00-00
Success.
DGS-3710-12C:admin#
25-3
config multicast_fdb
Description
This command is used to configure the multicast MAC address forwarding table.
Format
config multicast_fdb <vlan_name 32> <macaddr> [add | delete] <portlist>
Parameters
<vlan_name 32>
- Specifies the name of the VLAN on which the MAC address resides. The
maximum name length is 32 characters.
<macaddr>
- Specifies the MAC address that will be added or deleted to the forwarding table.
add
- Specifies to add ports.
delete
- Specifies to delete ports.
<portlist>
- Specifies a range of ports to be configured.