DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
685
Parameters
None.
Restrictions
None.
Example
To display the PVID auto-assignment state:
DGS-3710-12C:admin#show pvid auto_assign
PVID Auto-assignment: Enabled.
DGS-3710-12C:admin#
72-24
enable vlan_monitor target_port
Description
This command is used to enable the VLAN monitor function.
Format
enable vlan_monitor target_port <port> source_port <port>
Parameters
target_port
- Specifies the target port number used.
<port>
- Enter the target port number used here.
source_port
- Specifies the source port number used.
<port>
- Enter the source port number used here.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To monitor traffic from port 3 to port 1:
DGS-3710-12C:admin#enable vlan_monitor target_port 1 source_port 3
Command: enable vlan_monitor target_port 1 source_port 3
Success.
DGS-3710-12C:admin#