DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
22
Example
To disable HTTP:
DGS-3710-12C:admin#disable web
Command: disable web
Success.
DGS-3710-12C:admin#
2-20
save
Description
This command is used to save the current configuration or log in non-volatile RAM.
Format
save {[config <config_id 1-2> | log | all]}
Parameters
config
-
(Optional) Specifies to save configuration.
<config_id 1-2>
- Enter the configuration ID used here. This value can either be 1 or 2.
log
- (Optional) Specifies to save log.
all
- (Optional) Specifies to save changes to currently active configuration and save logs.
Note:
If no keyword is specified, all changes will be saved to bootup configuration file.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To save the current configuration to the bootup configuration file:
DGS-3710-12C:admin#save
Command: save
Saving all configurations to NV-RAM.......... Done.
DGS-3710-12C:admin#
To save the current configuration to destination file, named 1: