DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
624
62-16
delete snmp
Description
This command is used to delete a recipient of an SNMP trap operation.
Format
delete snmp [host <ipaddr> | v6host <ipv6addr>]
Parameters
host
- Specifies the IP address of the SNMP host recipient to be deleted.
<ipaddr>
- Specifies the IP address of the SNMP host recipient to be deleted.
v6host
- Specifies the IPv6 address of the SNMP host recipient to be deleted.
<ipv6addr>
- Specifies the IPv6 address of the SNMP host recipient to be deleted.
Restrictions
Only Administrator-level users can issue this command.
Example
To delete a recipient of an SNMP trap operation:
DGS-3710-12C:admin#delete snmp host 10.48.74.100
Command: delete snmp host 10.48.74.100
Success.
DGS-3710-12C:admin#
62-17
show snmp host
Description
This command is used to display the recipient for which the traps are targeted.
Format
show snmp host {<ipaddr>}
Parameters
<ipaddr>
- (Optional) Specifies the IP address of the recipient for which the traps are targeted.
Note:
If no parameter is specified, all SNMP hosts will be displayed.
Restrictions
None.