DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
391
38-5
show loopdetect
Description
This command is used to display the switch’s current loop detection configuration.
Format
show loopdetect
Parameters
None.
Restrictions
None.
Example
To display the switch’s current loop detection configuration:
DGS-3710-12C:admin#show loopdetect
Command: show loopdetect
LBD Global Settings
---------------------------
LBD Status : Disabled
LBD Mode : Port-Based
LBD Interval : 10
LBD Recover Time : 60
LBD Trap Status : None
DGS-3710-12C:admin#
38-6
show loopdetect ports
Description
This command is used to display the switch’s current per-port loop detection configuration and
status.
Format
show loopdetect ports [all | <portlist>]
Parameters
all
- System will display port loop detection information for all ports.
<portlist>
- Specifies a range of ports to be displayed.