DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
473
Format
config snmp system_location <sw_location>
Parameters
<sw_location>
- Specifies an SNMP system location for the switch. A maximum of 255
characters is allowed.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure the switch location for “HQ 5F”:
DGS-3710-12C:admin#config snmp system_location HQ 5F
Command: config snmp system_location HQ 5F
Success.
DGS-3710-12C:admin#
46-9
config snmp system_contact
Description
This command is used to enter the name and/or other information to identify an SNMP system
contact person who is responsible for the switch. A maximum of 255 characters can be used.
Format
config snmp system_contact <sw_contact>
Parameters
<sw_contact>
- Specifies an SNMP system contact person. A maximum of 255 characters is
allowed.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure the switch contact to “
M I S D e p a r t m e n t I V
”: