DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
174
Example
To print out all debug IMPB messages:
DGS-3710-12C:admin# debug address_binding all
Command: debug address_binding all
Success.
DGS-3710-12C:admin#
16-2
no debug address_binding
Description
This command is used to stop the IMPB debug starting when the IMPB module receives an
ARP/IP packet or a DHCP packet.
Format
no debug address_binding
Parameters
None.
Restrictions
Only Administrator level users can issue this command.
Example
To stop IMPB debug: starting when the IMPB module receives an ARP/IP or DHCP packet:
DGS-3710-12C:admin# no debug address_binding
Command: no debug address_binding
Success.
DGS-3710-12C:admin#
16-3
debug error_log
Description
Use this command to dump, clear or upload the software error log to a TFTP server.
Format
debug error_log [dump | clear | upload_toTFTP <ipaddr> <path_filename 64>]