DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
593
DGS-3710-12C:admin#config sim_group add 2
Command: config sim_group add 2
Please wait for ACK !!!
SIM Config Success !!!
Success.
DGS-3710-12C:admin#
To delete a member:
DGS-3710-12C:admin#config sim_group delete 1
Command: config sim_group delete 1
Please wait for ACK !!!
SIM Config Success !!!
Success.
DGS-3710-12C:admin#
59-6
config sim
Description
This command is used to configure the role state and parameters of discovery protocol on the
switch.
Format
config sim [[commander {group_name <groupname 64>} | candidate] | dp_interval <sec 30-
90> | hold_time <sec 100-255>]
Parameters
commander
- Transfer the role to commander.
group_name
- (Optional) If commander, users can specify the name of the group.
<groupname 64>
- If commander, users can specify the name of the group. The maximum
length is 64 characters.
candidate
- Transfer role to candidate.
dp_interval
- Specifies the time in seconds between discoveries.
<sec 30-90>
- Specifies the time in seconds between discoveries.
hold_time
- Specifies the time in seconds the device holds the discovery result.
<sec 100-255>
- Specifies the time in seconds the device holds the discovery result.
Restrictions
Only Administrator and Operator-level users can issue this command.