DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
274
Format
config igmp_snooping [vlan_name <vlan_name 32> | vlanid <vlanid_list> | all] {state [enable
| disable] | fast_leave [enable | disable] | proxy_reporting {state [enable | disable] |
source_ip {<ipaddr>}}(1)}
Parameters
vlan_name
- Specifies the name of the VLAN for which IGMP snooping is to be configured.
<vlan_name 32>
- Specifies the VLAN name. The maximum length is 32 characters.
vlanid
- Specifies the VLAN ID list.
<vlanid_list>
- Specifies the VLAN ID list.
all
- Specifies to configure all VLANs.
state
- Enable or disable IGMP snooping for the chosen VLAN.
enable
- Enable IGMP snooping for the chosen VLAN.
disable
- Disable IGMP snooping for the chosen VLAN.
fast_leave
- Enable or disable the IGMP snooping fast leave function. If enabled, the
membership is immediately removed when the system receive the IGMP leave message.
enable
- Enable the IGMP snooping fast leave function.
disable
- Disable the IGMP snooping fast leave function.
proxy_reporting
- Specifies to enable or disable the IGMP snooping proxy reporting function.
state
- Specifies the IGMP snooping proxy reporting function state.
enable
- Specifies that the IGMP snooping proxy reporting function state will be enabled.
disable
- Specifies that the IGMP snooping proxy reporting function state will be disabled.
source_ip
- Specifies the source IP address of the report. If it is not specified, the System IP
address will be used as the protocol souce IP address.
<ipaddr>
- Enter the source IP addres of the report here.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure IGMP snooping:
DGS-3710-12C:admin#config igmp_snooping vlan_name default state enable
fast_leave enable
Command: config igmp_snooping vlan_name default state enable fast_leave enable
Success.
DGS-3710-12C:admin#
27-2
config igmp_snooping querier
Description
This command is used to configure the IGMP snooping querier.
Format
config igmp_snooping querier [vlan_name <vlan_name 32> | vlanid <vlanid_list> | all]
{query_interval <sec 1-65535> | max_response_time <sec 1-25> | robustness_variable