DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
433
Note:
If no parameter is specified, the system will display all current MLD snooping
configurations.
Restrictions
None.
Example
To display MLD snooping:
DGS-3710-12C:admin#show mld_snooping
Command: show mld_snooping
MLD Snooping Global State : Disabled
Data Driven Learning Max Entries : 128
VLAN Name : default
Query Interval : 125
Max Response Time : 10
Robustness Value : 2
Last Listener Query Interval : 1
Querier State : Disable
Querier Role : Non-Querier
Querier IP : ::
Querier Expiry Time : 0 secs
State : Disable
Fast Done : Disable
Proxy Reporting : Enable
Proxy Reporting Source IP : ::
Rate Limit : No Limitation
Version : 2
Data Driven Learning State : Enable
Data Driven Learning Aged Out : Disable
Data Driven Group Expiry Time : 260
Total Entries: 1
DGS-3710-12C:admin#
42-19
show mld_snooping group
Description
This command is used to display the current MLD snooping group information on the switch.
Format
show mld_snooping group {[vlan <vlan_name 32> | vlanid <vlanid_list > | ports <portlist>]
{<ipv6addr>}} {data_driven}