DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
323
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable the address binding trap and log:
DGS-3710-12C:admin#enable address_binding trap_log
Command: enable address_binding trap_log
Success.
DGS-3710-12C:admin#
30-12
disable address_binding trap_log
Description
This command is used to disable address binding trap logs.
Format
disable address_binding trap_log
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable the address binding trap and log:
DGS-3710-12C:admin#disable address_binding trap_log
Command: disable address_binding trap_log
Success.
DGS-3710-12C:admin#
30-13
enable address_binding dhcp_snoop
Description
This command is used to enable the address binding DHCP snooping mode. By default, DHCP
snooping is disabled. If a user enables DHCP snooping, all address binding disabled ports will
function as server ports (the switch will learn IP addresses through server ports (by DHCP OFFER
and DHCP ACK packets)). Note that the DHCP discover packet can not be passed through the
user ports if the “
forward dhcppk”
function is disabled on this port.