DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
347
DGS-3710-12C:admin#create mcast_filter_profile profile_id 2 profile_name MOD
Command: create mcast_filter_profile profile_id 2 profile_name MOD
Success.
DGS-3710-12C:admin#
34-2
config mcast_filter_profile
Description
This command is used to modify the profile name, add or delete a range of previously defined
multicast IP addresses to or from the profile.
Format
config mcast_filter_profile [profile_id <value 1-60> | profile_name <name 1-32> ]
{profile_name <name 1-32> | [add | delete] <mcast_address_list>}(1)
Parameters
profile_id
- Specifies the ID of the profile.
<value 1-60>
- The profile ID must be between 1 and 60.
profile_name
- Specifies the name of the profile.
<name 1-32>
- The profile name can be up to 32 characters long.
profile_name
–Specifies a new name of the profile.
<name 1-32>
- The profile name can be up to 32 characters long.
add
- Specifies to add a range of multicast IP addresses.
delete
- Specifies to delete a range of multicast IP addresses.
<mcast_address_list>
- List of the multicast addresses to be added to or deleted from the
profile. Either specifiy a single multicast IP address or a range of multicast addresses
using a hyphen.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To add a range of multicast addresses to a profile:
DGS-3710-12C:admin#config mcast_filter_profile profile_id 2 add 225.1.1.1 –
225.1.1.100
Command: config mcast_filter_profile profile_id 2 add 225.1.1.1 – 225.1.1.100
Success.
DGS-3710-12C:admin#