DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
192
DGS-3710-12C:admin# debug dhcpv6_relay packet sending state enable
Command: debug dhcpv6_relay packet sending state enable
Success.
DGS-3710-12C:admin#
16-24
debug show status
Description
Show the debug handler state and the specified module’s debug status.
If the input module list is empty, the states of all registered modules which support debug module
will be shown.
Format
debug show status {module <module_list>}
Parameters
module
– (Optional) Specifies the module list.
<module_list>
- Enter the module list here.
Restrictions
Only Administrator-level users can issue this command.
Example
To show the specified module’s debug state:
DGS-3710-12C:admin# debug show status module MSTP
Command: debug show status module MSTP
Debug Global State : Enable
MSTP
: Enable
DGS-3710-12C:admin#
To show the debug state: