DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
291
DGS-3710-12C:admin#show igmp_snooping host group 225.0.1.0
Command: show igmp_snooping host group 225.0.1.0
Port VLANID Group Host Timeout Up Time
---- ------- --------------- --------------- ------- --------------
1 1 225.0.1.0 10.0.0.1 199 00:01:02
1 1 225.0.1.0 10.0.0.2 199 00:01:02
1 1 225.0.1.0 10.0.0.3 199 00:01:02
Total Entries : 3
DGS-3710-12C:admin#
27-21
show router_ports
Description
This command is used to display the currently configured router ports on the switch.
Format
show router_ports [vlan <vlan_name 32> | vlanid <vlanid_list> | all] {[static | dynamic |
forbidden]}
Parameters
vlan
- Specifies the name of the VLAN on which the router port resides.
<vlan_name 32>
- Specifies the VLAN name. The maximum length is 32 characters.
vlanid
- Specifies the ID of the VLAN on which the router port resides.
<vlanid_list>
- Specifies the VLAN ID list.
all
– Specifies that all the VLANs will be included in the display.
static
- (Optional) Display router ports that have been statically configured.
dynamic
- (Optional) Display router ports that have been dynamically registered.
forbidden
- (Optional) Display forbidden router ports that have been statically configured.
Note:
If no parameter is specified, the system will display all currently configured
router ports on the switch.
Restrictions
None.
Example
To display the router ports on the default VLAN:
DGS-3710-12C:admin#show router_ports vlan default
Command: show router_ports vlan default
VLAN Name : default
Static Router Port :
Dynamic Router Port :