DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
336
Format
delete ipv6 neighbor_cache ipif [<ipif_name 12> | all] [<ipv6addr> | static | dynamic | all]
Parameters
<ipif_name 12>
- Specifies the IPv6 interface name.
all
- Specifies all IPv6 interfaces.
<ipv6addr>
- Specifies the IPv6 address of the neighbor.
static
- Specifies to delete the IPv6 static entries.
dynamic
- Specifies to delete the IPv6 dynamic entries.
all
- Specifies all IPv6 entries, including static and dynamic, to be deleted.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To delete the neighbor cache.entry for IPv6 address 3ffc::1 on the IP interface “System”:
DGS-3710-12C:admin#delete ipv6 neighbor_cache ipif System 3ffc::1
Command: delete ipv6 neighbor_cache ipif System 3FFC::1
Success.
DGS-3710-12C:admin#
31-3
show ipv6 neighbor_cache ipif
Description
This command is used to display the neighbor cache entry for the specified interface. Users can
display a specific entry, all static entries, all dynamic entries, or all entries.
Format
show ipv6 neighbor_cache ipif [<ipif_name 12> | all] [ipv6address <ipv6addr> | static |
dynamic | all]
Parameters
<ipif_name 12>
- Specifies the IPv6 interface name.
all
- Specifies all the IPv6 interface names.
ipv6address
- Specifies the IPv6 address of the neighbor.
<ipv6addr>
- Specifies the IPv6 address
static
- Specifies to display the IPv6 static neighbor cache entries.
dynamic
- Specifies to display the IPv6 dynamic entries.
all
- Specifies to display all IPv6 addresses, static and dynamic.