DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
553
53-22
config mgmt_pkt_priority
Description
This command is used to configure the priority of managment packets.
Format
config mgmt_pkt_priority [default | <priority 0-7>]
Parameters
default
- Specifies to use the original management packet priority.
<priority 0-7>
- Enter the priority value for the packets here. This value must be between 0 and
7, where 7 has the highest priority.
Restrictions
Only Administrator-level users can issue this command.
Example
To configure priority of managment packets setting:
DGS-3710-12C:admin#config mgmt_pkt_priority 3
Command: config mgmt_pkt_priority 3
Success.
DGS-3710-12C:admin#
53-23
show mgmt_pkt_priority
Description
This command is used to display current priority of management packets.
Format
show mgmt_pkt_priority
Parameters
None.
Restrictions
None.