DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
156
Example
To clear all the CFM packet RX/TX counters:
DGS-3710-12C:admin#clear cfm pkt_cnt
Command: clear cfm pkt_cnt
Success.
DGS-3710-12C:admin#
To clear all the CFM packet CCM RX counters:
DGS-3710-12C:admin#clear cfm pkt_cnt ccm
Command: clear cfm pkt_cnt ccm
Success.
DGS-3710-12C:admin#
12-29
show cfm remote_mep
Description
This command is used to display CFM remote MEP information.
Format
show cfm remote_mep [mepname <string 32> | md [<string 22> | md_index <uint 1-
4294967295>] ma [<string 22> | ma_index <uint 1-4294967295>] mepid <int 1-8191>]
remote_mepid <int 1-8191>
Parameters
mepname
- Specifies the MEP name.
<string 32>
- Specifies the MEP name. The maximum length is 32 characters.
md
- Specifies the maintenance domain name.
<string 22>
- Specifies the maintenance domain name. The maximum length is 22
characters.
md_index
- Specifies the maintenance domain index.
<uint 1-4294967295>
- Enter the maintenance domain index value here. This value must
be between 1 and 4294967295.
ma
- Specifies the maintenance association name.
<string 22>
- Specifies the maintenance association name. The maximum length is 22
characters.
ma_index
- Specifies the maintenance association index.
<uint 1-4294967295>
- Enter the maintenance association index value here. This value
must be between 1 and 4294967295.
mepid
- Specifies the MEPID.
<int 1-8191>
- Specifies the MEP MEPID between 1 and 8191.
remote_mepid
- Specifies the remote MEPID.
<int 1-8191>
- Specifies the remote MEPID between 1 and 8191.