DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
284
Format
show igmp_snooping static_group {[vlan <vlan_name 32> | vlanid <vlanid_list>] <ipaddr>}
Parameters
vlan
- Specifies the name of the VLAN on which the router port resides.
<vlan_name 32>
- Specifies the VLAN name. The maximum length is 32 characters.
vlanid
- Specifies the VLAN ID list on which the router port resides.
<vlanid_list>
- Specifies the VLAN ID list.
<ipaddr>
- Specifies the multicast group IP address (for Layer 3 switch).
Restrictions
None.
Example
To display all the IGMP snooping static groups:
DGS-3710-12C:admin#show igmp_snooping static_group
Command: show igmp_snooping static_group
VLAN ID/Name IP Address Static Member Ports
--------------------------------------- -------------- --------------------
1/Default 239.1.1.1 9-10
Total Entries : 1
DGS-3710-12C:admin#
27-14
show igmp_snooping statistic counter
Description
This command is used to display the IGMP snooping statistics counter for IGMP protocol packets
that are transmitted or received by the switch since IGMP snooping was enabled.
Format
show igmp_snooping statistic counter [vlan <vlan_name 32> | vlanid <vlanid_list> | ports
<portlist>]
Parameters
vlan
- Specifies a VLAN to be displayed.
<vlan_name 32>
- Specifies the VLAN name. The maximum length is 32 characters.
vlanid
- Specifies a list of VLANs to be displayed.
<vlanid_list>
- Specifies the VLAN ID list.
ports
– Specifies a list of ports to be displayed.
<portlist>
- Specifies a list of ports.