DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
47
4-8
config 802.1x capability ports
Description
This command is used to configure port capability.
Format
config 802.1x capability ports [<portlist> | all] [authenticator | none]
Parameters
<portlist>
- Specifies a range of ports to be configured.
all
- Specifies to configure all ports.
authenticator
- The port that wishes to enforce authentication before allowing access to services
that are accessible via that port adopts the authenticator role.
none
– Disable authentication on specified port.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure port capability for ports 1 to 10:
DGS-3710-12C:admin#config 802.1x capability ports 1-10 authenticator
Command: config 802.1x capability ports 1-10 authenticator
Success.
DGS-3710-12C:admin#
4-9
config 802.1x fwd_pdu ports
Description
This command is used to configure the 802.1X PDU forwarding state on specific ports on the
switch.
Format
config 802.1x fwd_pdu ports [<portlist> | all] [enable | disable]
Parameters
<portlist>
- Specifies a range of ports to be configured.
all
- Specifies all ports.
enable
- Enable the 802.1X PDU forwarding state.
disable
- Disable the 802.1X PDU forwarding state.