![background image](/i/d-link/144853/d-link-dgs-3710-12c/h/d-link-dgs-3710-12c-183.png)
DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
179
Example
To set the switch to not need a reboot when a fatal error occurs:
DGS-3710-12C:admin# debug config error_reboot disable
Command: debug config error_reboot disable
Success.
DGS-3710-12C:admin#
16-7
debug config state
Description
Use the command to set the state of the debug.
Format
debug config state [enable | disable]
Parameters
enable
- Enable the debug state.
disable
- Disable the debug state.
Restrictions
Only Administrator level users can issue this command.
Example
To set the debug state to disabled:
DGS-3710-12C:admin# debug config state disable
Command: debug config state disable
Success.
DGS-3710-12C:admin#
16-8
debug show error_reboot state
Description
Use the command to show the error reboot status.
Format
debug show error_reboot state