DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
218
to the client. If this command is input twice for the same pool, the second command will overwrite
the first command.
Format
config dhcp pool netbios_name_server <pool_name 12> {<ipaddr>} {<ipaddr>} {<ipaddr>}
Parameters
<pool_name 12>
- Specifies the DHCP pool name.
<ipaddr>
- (Optional) Specifies the IP address of the WINS server. Up to three IP addresses can
be specified on one command line.
Restrictions
Only Administrator-level users can issue this command.
Example
To configure a WINS server IP address:
DGS-3710-12C:admin#config dhcp pool netbios_name_server wserver 10.10.10.1
Command: config dhcp pool netbios_name_server wserver 10.10.10.1
Success.
DGS-3710-12C:admin#
19-10
config dhcp pool netbios_node_type
Description
This command is used to specify the NetBIOS node type for a Microsoft DHCP client.
The NetBIOS node type for Microsoft DHCP clients can be one of four settings: broadcast, peer-to-
peer, mixed, or hybrid. Use this command to configure a NetBIOS over TCP/IP device that is
described in RFC 1001/1002. By default, the NetBIOS node type is broadcast.
Format
config dhcp pool netbios_node_type <pool_name 12> [broadcast | peer_to_peer | mixed |
hybrid]
Parameters
<pool_name 12>
- Specifies the DHCP pool name.
broadcast
- Specifies the NetBIOS node type for Microsoft DHCP clients as broadcast.
peer_to_peer
- Specifies the NetBIOS node type for Microsoft DHCP clients as peer_to_peer.
mixed
- Specifies the NetBIOS node type for Microsoft DHCP clients as mixed.
hybrid
- Specifies the NetBIOS node type for Microsoft DHCP clients as hybrid.