DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
580
disable
- Specifies to disable the interval.
<sec 20-120>
- Specifies the interval, in seconds, between 20 and 120.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To create the sFlow counter poller:
DGS-3710-12C:admin#create sflow counter_poller ports 1 analyzer_server_id 1
Command: create sflow counter_poller ports 1 analyzer_server_id 1
Success.
DGS-3710-12C:admin#
57-12
config sflow counter_poller ports
Description
This command is used to configure the sflow counter poller parameters. If a user wants to change
the analyzer server ID, they need to delete the counter poller and create a new one.
Format
config sflow counter_poller ports [<portlist> | all] interval [disable | <sec 20-120>]
Parameters
<portlist>
- Specifies the ports to be configured.
all
- Specifies to configure all ports.
interval
- Specifies the maximum number of seconds between successive samples of the
counters. If set to disabled, the counter sample is disabled.
disable
- Specifies to disable the interval.
<sec 20-120>
- Specifies the interval, in seconds, between 20 and 120.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure the sFlow counter poller parameters interval to 50 for port 1:
DGS-3710-12C:admin#config sflow counter_poller ports 1 interval 50
Command: config sflow counter_poller ports 1 interval 50
Success.
DGS-3710-12C:admin#