DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
53
Parameters
port_based ports
- The switch passes data based on its authenticated port.
<portlist>
- Specifies a range of ports to be configured.
all
- Specifies to configure all ports.
mac_based ports
- The switch passes data based on the MAC address of authenticated
RADIUS client.
<portlist>
- Specifies a range of ports to be configured.
all
- Specifies to configure all ports.
mac_address
- (Optional) Specifies the MAC address of the authenticated RADIUS client.
<macaddr>
- Enter the MAC address here.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To reauthenticate the device connected with the port:
DGS-3710-12C:admin# config 802.1x reauth port_based ports all
Command: config 802.1x reauth port_based ports all
Success.
DGS-3710-12C:admin#
4-17
create 802.1x guest_vlan
Description
This command is used to assign a static VLAN to be a guest VLAN. The specific VLAN which is
assigned to a guest VLAN must already exist. The specific VLAN which is assigned to the guest
VLAN can’t be deleted.
Format
create 802.1x guest_vlan <vlan_name 32>
Parameters
<vlan_name 32>
- Specifies the static VLAN to be a guest VLAN.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To assign a static VLAN to be a guest VLAN:
DGS-3710-12C:admin# create 802.1x guest_vlan guestVLAN
Command: create 802.1x guest_vlan guestVLAN