DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
466
Format
config stp mst_ports <portlist> instance_id <value 0-15> {internalCost [auto | <value 1-
200000000>] | priority <value 0-240>} (1)
Parameters
<portlist>
- Specifies a range of ports.
instance_id
- Specifies an instance ID.
<value 0-15>
- Instance = 0 represents CIST, Instance from 1 to 15 represents MSTI 1 to
MSTI 15.
internalCost
- The Port Path Cost used in MSTP.
auto
- Specifies to automatically determine the internal cost.
<value 1-200000000>
- Specifies a value between 1 and 200000000.
priority
- Specifies the Port Priority.
<value 0-240>
- Specifies a value between 0 and 240.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure STP MST ports:
DGS-3710-12C:admin# config stp mst_ports 1 instance_id 0 internalCost auto
Command: config stp mst_ports 1 instance_id 0 internalCost auto
Success.
DGS-3710-12C:admin#