DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
472
DGS-3710-12C:admin#show trusted_host
Command: show trusted_host
Management Stations
IP Address Access Interface
----------------------------------------------------------------------------
10.48.93.100
10.51.17.1
10.50.95.90
Total Entries : 3
DGS-3710-12C:admin#
46-7
config snmp system_name
Description
This command is used to configure the SNMP system name of the switch.
Format
config snmp system_name <sw_name>
Parameters
<sw_name>
- Specifies an SNMP system name for the switch. A maximum of 255 characters is
allowed.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure the switch SNMP name for “DGS-3710-12C Fast Ethernet Switch”:
DGS-3710-12C:admin#config snmp system_name DGS-3710-12C Fast Ethernet Switch
Command: config snmp system_name DGS-3710-12C Fast Ethernet Switch
Success.
DGS-3710-12C:admin#
46-8
config snmp system_location
Description
This command is used to enter a description of the SNMP system location of the switch. A
maximum of 255 characters can be used.