DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
655
Chapter 71
Utility Commands
download
[firmware_fromTFTP [<ipaddr> | <ipv6addr>] src_file <path_filename 64> {image_id
<int 1-2>} | cfg_fromTFTP [<ipaddr> | <ipv6addr>] src_file <path_filename 64> {[<config_id 1-
2> | increment]}]
upload
[cfg_toTFTP [<ipaddr> | <ipv6addr>] dest_file <path_filename 64> {<config_id 1-2>}
{[include | exclude | begin] <filter_string 80> {<filter_string 80> {<filter_string 80>}} {[include |
exclude | begin] <filter_string 80> {<filter_string 80> {<filter_string 80>}} {[include | exclude |
begin] <filter_string 80> {<filter_string 80> {<filter_string 80>}}}}} | log_toTFTP [<ipaddr> |
<ipv6addr>] dest_file <path_filename 64> | attack_log_toTFTP [<ipaddr> | <ipv6addr>]
dest_file <path_filename 64>]
config configuration
<config_id 1-2> [boot_up | delete | active]
show config
[[effective | modified | current_config | config_in_nvram <config_id 1-2>] {[include |
exclude | begin] <filter_string 80> {<filter_string 80> {<filter_string 80>}} {[include | exclude |
begin] <filter_string 80> {<filter_string 80> {<filter_string 80>}} {[include | exclude | begin]
<filter_string 80> {<filter_string 80> {<filter_string 80>}}}}} | information]
ping
<ipaddr> {times <value 1-255>} {timeout <sec 1-99>} {size <value 1-6000>}
ping6
<ipv6addr> {times <value 1-255> | size <value 1-6000> | timeout <value 1-99>}
traceroute
<ipaddr> {ttl <value 1-60> | port <value 30000-64900> | timeout <sec 1-65535> | probe
<value 1-9>}
traceroute6
<ipv6addr> {ttl <value 1-60> | port <value 30000-64900> | timeout <sec 1-65535> |
probe <value 1-9>}
config firmware image_id
<int 1-2> [delete | boot_up]
show firmware information
71-1
download
Description
This command is used to download a new firmware or a switch configuration file.
Format
download [firmware_fromTFTP [<ipaddr> | <ipv6addr>] src_file <path_filename 64>
{image_id <int 1-2>} | cfg_fromTFTP [<ipaddr> | <ipv6addr>] src_file <path_filename 64>
{[<config_id 1-2> | increment]}]
Parameters
firmware_fromTFTP
- Download and install new firmware on the switch from a TFTP server.
<ipaddr>
-
Specifies the IP address of the TFTP server.
<ipv6addr>
-
Specifies the IPv6 address of the TFTP server.
src_file
-
Specifies the path name and file name of the TFTP server. It can be a relative path
name or an absolute path name. If path name is not specified, it refers to the TFTP server
path. The maximum length is 64 characters.
<path_filename 64> -
Specifies the path name and file name of the TFTP server. It can be a
relative path name or an absolute path name. If path name is not specified, it refers to the
TFTP server path. The maximum length is 64 characters.
image_id
- (Optional) Specifies the image ID used here.
<int 1-2>
- Enter the image ID value used here. This value can either be 1 or 2.
cfg_fromTFTP
- Download and install new configuration file on the switch from a TFTP server.
<ipaddr>
-
Specifies the IP address of the TFTP server.
<ipv6addr>
-
Specifies the IPv6 address of the TFTP server.